Live stateMonitor
Know what is online, what is degrading and what needs attention, without walking the decks.
- ICMP availability
- Latency & packet loss
- Health indicators
- Event stream
- Focus Mode
- Alarms
One intelligent environment for engineering, monitoring and managing the technology behind modern superyachts.
Hundreds of networked devices, several VLANs, racks, patch panels and thousands of cables. The information that explains them lives in spreadsheets, PDFs, inboxes and on one engineer's laptop. Supervisor turns it into one structured, live record.
Wireless access point · ceiling, salon centre
Locate the equipment, see what it depends on and spot connectivity problems from one view.
Documentation belongs to the vessel and stays available through every rotation and handover.
Support teams see several vessels from one place and know where attention is needed.
Installation documentation becomes the operational record instead of a PDF archive.
Structured equipment information and fault history for every device.
The record engineers draw is the same record the monitoring runs on.
MAVIT Supervisor is more than network monitoring. It is an engineering, monitoring and lifecycle platform for everything connected on board.
Know what is online, what is degrading and what needs attention, without walking the decks.
A structured inventory of every device with its addressing, relationships, notes and engineering metadata.
See equipment where it is installed and how the network is built, from the deck plan down to the rack unit.
Model racks, patch panels and cables before installation, then carry them through commissioning into operation.
Coordinate support across organisations and fleets with roles, permissions and prioritised attention.
Raise an issue against the exact device, with its category, notes and fault history attached.
Clients own their vessels. Service providers support them under defined roles and permissions.
Define a device type once, then reuse its ports, monitoring and metadata across vessels.
Hand over a structured infrastructure record instead of a folder of drawings.
Four views of the same vessel. Each one is interactive below. Screens are representative product visualizations with illustrative data.
| Device | IP | Location | Latency | Loss | Last 60 samples |
|---|
Availability, latency and packet loss for every onboard device, with a live event stream. Focus Mode tightens the refresh interval on the devices you are working on.
Every device is placed on the vessel's GA. Move from deck to room to device and see its live status where it is installed. Select a device on the plan.
WAN links, firewalls, routers and switches drawn as directed relationships, so the shape of the network is clear at a glance.
Document what is installed, in which rack unit, and how every port is patched. Trace a cable from the switch to the device in the room.
The same infrastructure record is created at the drawing board, verified at handover and monitored at sea. Nothing is re-entered and nothing is lost between phases.
Select a stage above to see how a single access point record evolves from a planned item to a commissioned device to a monitored endpoint.
Simulation and hybrid workflows. Run parts of a vessel live while other systems are still being commissioned, or simulate infrastructure before the yard hands it over.
Fleet Command gives management companies and support teams a single view across vessels. The Support Attention Score ranks where engineering time is needed first.
Remote technical support companies look after many yachts for many clients. MAVIT Supervisor gives your engineers one console to see which vessel needs attention, understand the fault before calling the crew, and guide the fix with the vessel's own documentation.
| Score | Vessel | Client | Issue | Since | Status |
|---|---|---|---|---|---|
| 68 | M/Y Alpha | Client A | CAM-MD-AFT offline | 08:52 | Diagnosing |
| 44 | M/Y Beta | Client B | VSAT heartbeat delayed | 10:14 | New |
| 27 | M/Y Gamma | Client A | Link restored, events forwarded | 06:40 | Review |
| 15 | M/Y Delta | Client C | Commissioning 118 / 240 | Mon | Scheduled |
Each client organisation keeps its own vessels. Your team works across all of them under the roles each client grants.
The Fleet Support Attention Score puts the vessel that needs an engineer first at the top of the queue.
Live status, upstream switch port, patch, cable and room location in one place, so you can tell a dead device from a dead link.
The vessel agent connects outbound only. There is no VPN to keep alive, and events cached during link loss arrive when the link returns.
Point the ETO to the exact rack unit, port and junction box using the vessel's own GA and cable records.
Every fault stays attached to its device, so the next engineer on shift starts from what was already tried.
The agent reports a device down or degraded.
The queue ranks it against every vessel you attend.
Status, dependencies and cable path show where the fault sits.
Send the crew to the exact location with the right part.
The fix is kept in the device's fault history.
Technical enough for the engineer who maintains the racks. Clear enough for the captain, owner's representative and manager who need to trust them.
"Which switch port is the salon AP on, and is it the cable or the device?"
Find and fix faster. Every device, port and cable is documented and shown with live status, so a fault is traced in the system instead of in the ceiling.
"Our as-built documentation should outlive the handover."
Design, commission, hand over. Build the infrastructure model before installation, verify it on site and deliver a living record the client keeps using.
"Which of our vessels needs technical attention this week?"
See the fleet in one place. Fleet Command and the Support Attention Score show vessel status and prioritised issues across every managed yacht.
"I need the vessel's network in front of me before I call the ETO."
Troubleshoot the fleet you attend. One support queue across clients and vessels, with each vessel's inventory, topology and fault history under the access each client grants. See remote support →
Owners, their representatives, captains and chief engineers get the same assurance at a higher level: the vessel's technical infrastructure is documented, monitored and maintained in a record that belongs to the yacht.
A lightweight agent runs on board, close to the equipment. It connects outbound only and keeps working when the satellite link does not.
Switches, APs, AV, CCTV, servers, nav gateways
Monitors locally, caches events, sends heartbeats
MQTT telemetry over the vessel's WAN, initiated from on board
Fleet, documentation and monitoring
The architecture is designed with secure communications and operational resilience in mind. Try the link-loss simulation to see buffering and forwarding.
The iPad app turns any tablet into a live monitoring screen: a quick view for the ETO office, the engine control room or the bridge. iPhone and Apple Watch extend the same view to whoever is on watch.
Heartbeat 2 s ago
Representative screens with illustrative data. iPhone and Apple Watch apps are on the product roadmap and not yet released.
See how MAVIT Supervisor brings technical documentation, engineering workflows and infrastructure visibility into one environment. Demos are tailored to your vessel or fleet.
For enquiries or to arrange a private demo, email us at contact@solrex.tech.
Tell us a little about your vessel or fleet and what you’d like to discuss.